Skip to content
01Home02About03Services04Careers05Contact
info@calibretech.co.in
+91 8113 949 462 · +971 5813 52967
Offshore platform topsides at sea
Home/Services

Engineering excellence across every depth.

Eight specialist disciplines covering the full project lifecycle — from hull design and heavy lift to subsea pipelines and offshore wind, drawing board to seabed.

Heavy-lift cranes loading monopile sections onto a transport vessel
02 · Heavy Lift & TransportMarine Operations
Marine Operations

Heavy Lift & Transport

Complex offshore installation and transportation engineering — planning and executing load-out, float-off and heavy lift operations with precision.

  • 01Load-out analysis & sequence drawings
  • 02Ballast plan & float-off analysis
  • 03Lifting & rigging arrangement design
  • 04Sea-fastening & stool design
  • 05Tow analysis & marine warranty support
CodesDNV-ST-N001ISO 19901-6
ToolsBentley MOSESBentley SACSANSYS
Fixed offshore platforms in a rough sea
03 · Structural AnalysisGlobal & Local
Global & Local

Structural Analysis

Comprehensive structural integrity assessment for FPSOs, tankers and offshore fixed platforms — ensuring safety and classification compliance.

  • 013-cargo hold analysis (FPSO / FSO / tanker)
  • 02Global & in-place analysis for offshore platforms
  • 03Fatigue strength evaluation
  • 04Stability & tow analysis
CodesAPI RP 2AISO 19902DNV-RP-C203
ToolsBentley SACSANSYSTekla Structures
Aerial view of an offshore vessel holding station
04 · Mooring & HydrodynamicsMarine Dynamics
Marine Dynamics

Mooring & Hydrodynamics

Advanced mooring analysis and marine hydrodynamic studies ensuring stability and station-keeping performance in extreme sea conditions.

  • 01Mooring system design & analysis
  • 02Marine hydrodynamics & hydrostatics
  • 03Motion response analysis (RAOs)
  • 04Station-keeping assessment
CodesDNV-OS-E301API RP 2SKISO 19901-7
ToolsOrcaFlexBentley MOSESOpenFOAM
Sunlight filtering through deep blue ocean water
05 · Riser & Umbilical DesignSubsea Systems
Subsea Systems

Riser & Umbilical Design

Complete lifecycle engineering of flexible risers, umbilicals and hoses — covering FEED studies, dynamic analysis and VIV suppression.

  • 01Dynamic analysis of riser systems
  • 02VIV analysis & suppression design
  • 03J-tube & I-tube pull-in analysis
  • 04Mid-water arch design
  • 05Mooring / riser clashing analysis
CodesAPI RP 17BAPI RP 2RDDNV-RP-F204
ToolsOrcaFlexANSYS
Offshore construction vessel with crane working at sea, aerial view
06 · Offshore Pipeline EngineeringSubsea Infrastructure
Subsea Infrastructure

Offshore Pipeline Engineering

End-to-end offshore pipeline design using Offpipe and OrcaFlex — installation, on-bottom stability, free spanning and cathodic protection.

  • 01Dynamic J-Lay & S-Lay installation analysis
  • 02Global buckling & mitigation measures
  • 03On-bottom stability & free-span assessment
  • 04Cathodic protection design
  • 05Dropped object assessment
CodesDNV-ST-F101DNV-RP-F109DNV-RP-F105DNV-RP-F103
ToolsOffpipeOrcaFlex
Offshore wind turbines on jacket foundations
07 · Offshore RenewablesOffshore Wind
Offshore Wind

Offshore Renewables

Comprehensive offshore wind farm development — from site assessment through turbine foundation design, installation planning and energy-transition support.

  • 01Site assessment & metocean characterisation
  • 02Turbine foundation & tower design
  • 03Installation planning & logistics
  • 04Project management & risk assessment
  • 05Grid connection engineering
CodesDNV-ST-0126DNV-ST-0437IEC 61400-3
ToolsOrcaFlexANSYSBentley SACS
Engineers reviewing technical drawings beside a laptop
08 · 3D Modelling & VisualisationTechnical Animation
Technical Animation

3D Modelling & Visualisation

High-fidelity 3D models, interactive mooring layouts and photorealistic engineering visualisation — from FPSO arrangements to structural animations and fabrication drawings.

  • 01Interactive mooring system layouts
  • 02Rhino 3D modelling & BIM integration
  • 03Blender & SolidWorks photorealistic renders
  • 04Layout, shop, P&ID and E&ID drawings
  • 05Technical animation & walkthrough videos
CodesISO 128ISO 10628
ToolsRhino 3DBlenderSolidWorksInventorTekla
Design basis

Codes & standards we work to.

Every deliverable is referenced to the governing code and classification requirements agreed in the design basis, ready for third-party verification and class review.

StandardApplication
DNV-OS-E301 / API RP 2SKPosition mooring and station-keeping of floating units
DNV-ST-F101Submarine pipeline systems — design, installation, operation
DNV-RP-F109 / F105On-bottom stability and free-spanning pipelines
API RP 2A / ISO 19902Fixed offshore platforms — in-place, fatigue and installation
API RP 17B / 2RDFlexible pipe and dynamic riser design
DNV-ST-0126Support structures for wind turbines
DNV-ST-N001Marine operations and marine warranty
IMO MSC.267 (IS Code)Intact stability of ships
ISO 19901 seriesMetocean, mooring, marine operations
BV · LR · ABS · DNV · IRSClass rules for hull scantlings and approval
Our toolbox

Industry-leading software.

We leverage the same tools used by leading engineering consultancies worldwide.

OrcaFlexOrcinaDynamic mooring & riser analysis
OffpipeOffpipeOffshore pipeline installation
SACSBentleyOffshore structural analysis
MOSESBentleyFloat-over & marine operations
ANSYSAnsysStructural finite element analysis
OpenFOAMOpen sourceCFD & flow simulation
MAXSURFBentleyVessel stability & performance
Rhino 3DMcNeelNaval & structural modelling
Tekla StructuresTrimbleStructural BIM modelling
AutoCADAutodesk2D drafting & detailing
InventorAutodesk3D mechanical & part design
SolidWorksDassault SystèmesMarine equipment design
BlenderBlender Foundation3D animation & rendering
Another tool?Ask our teamTell us the software and file formats your project uses.
Need engineering support?

Expert advice and a tailored proposal within 72 hours.

Share your scope, water depth and governing codes — we'll connect you with the right specialist.